










Walksnail Avatar Moonlight + GM3 V2 Integrated VTX & Gimbal PNP Kit
Best for smooth aerial passes over wide open landscapes


Flexible HD Video Modes
One gimbal, two control paths. Switch between UART head tracking and PWM radio control to match your vehicle, your setup, and your style.
Wide-Range 3-Axis Movement
Look up, down, and all around. The GM3 gimbal covers ±120° of pitch, ±60° of roll, and ±160° of yaw, giving you a wide field of view.
Discover the Night
Equipped with a starlight sensor, it captures unexpected moments with stunning image quality, even in the dimmest conditions.
One Kit. More RC Possibilities
FAQ
Does the kit come pre-assembled?
Yes. The VTX and gimbal are integrated and pre-assembled.
How far can the video signal transmit?
Video range varies with the environment. Buildings, trees, and other obstacles can shorten it. Your practical driving range is limited by whichever signal drops first—the video or the remote control.
What mounting space is required for this kit?
The kit requires a mounting area of approximately 10 × 5 cm, with a base plate about 0.5 cm thick. The required height varies by VTX version, so please check the dimensions of your selected version before purchase. Make sure there is also enough clearance for the gimbal to move.
Which FPV goggles or VRX receivers are compatible with this kit?
The VTX in this kit works with compatible Walksnail Avatar goggles. If your goggles have an HDMI input, you can connect them to the Walksnail Avatar VRX via HDMI. The Avatar VRX is sold separately.
What else do I need to use this kit on my RC car?
You’ll need a compatible power supply and FPV goggles, or an HDMI-compatible headset with the Walksnail Avatar VRX.
What types of vehicles can this FPV head tracking kit be installed on?
It is designed for RC cars, RC boats, fixed-wing aircraft, and FPV drones. Please make sure your vehicle has enough mounting space and clearance for the gimbal to move.
What battery voltage does the GM3 Kit support?
It supports a wide voltage input of 11.1V–25.2V, compatible with 3S–6S LiPo batteries. Do not use a battery above 26V, as it will permanently damage the kit. Static power consumption is up to 22W, and up to 40W when the gimbal is stalled. Disconnect the power when not in use.
How do I set up head tracking?
Power on the goggles and camera, short-press the pairing button, and wait for the goggles to beep and the camera indicator to stay solid red. Then go to Settings > Head Tracking and select Gimbal. The gimbal will follow your head movement, and pressing the Back button 3 times quickly re-centers it.
How do I re-center the gimbal if it drifts or points the wrong way?
You can quickly press the Back button on the goggles 3 times to re-center the gimbal. Alternatively, go to the head tracking menu and select “Reset Attitude Angle” to return the gimbal to its neutral point.







![[BETA TEST] Walksnail Nexus AIO-1S Flight Controller & VTX](http://www.caddxfpv.com/cdn/shop/files/20260920-141551.png?v=1789884994&width=400)






















































































































